Call now
Same day service
£ No call-out fee
Fully insured
12-month guarantee
Trusted plumber in Anlaby

Plumber in Anlaby: same day service

Local engineers covering Anlaby (HU10) and surrounding areas. No call-out fee, 12-month guarantee.

Call us on 01482 770 041

Anlaby's mainly residential with a mix of 1930s semis, post-war estates, and some newer builds in HU10. The 1930s properties often have galvanised steel pipework that's corroded inside, causing low pressure and discolored water. We're called out regularly for pipe replacements, tap repairs, and blocked waste pipes.

Anlaby's mainly residential with a mix of 1930s semis, post-war estates, and some newer builds. The 1930s properties often have galvanised steel pipework that's corroded inside, causing low pressure and discolored water. We're called out regularly for pipe replacements, tap repairs, and blocked waste pipes.

Services in Anlaby

Plumbing services we offer in Anlaby

🚨

Emergency Plumber in Anlaby

Burst pipes, major leaks, no water. We aim to get to you within 2 hours across Hull.

From £85 – £150
Learn more
🚰

Blocked Drains in Anlaby

Blocked sinks, toilets, outside drains. We'll clear them fast with jetting or rods.

From £85 – £250
Learn more
🚰

Tap & Toilet Repairs in Anlaby

Dripping taps, running toilets, broken flush mechanisms. Quick fixes at fixed prices.

From £60 – £180
Learn more
🔧

General Plumbing in Anlaby

New installations, pipe repairs, upgrades. All general plumbing work across Hull.

From £80 – £500
Learn more
🔥

Boiler Repairs in Anlaby

Boiler breakdowns, no heating, no hot water. Gas Safe engineers deployed fast.

From £85 – £500
Learn more
🔍

Leak Detection in Anlaby

Find hidden leaks with thermal imaging and pressure testing. No guesswork.

From £120 – £400
Learn more
♨️

Radiators & Heating in Anlaby

Radiator repairs, replacements, power flushing, thermostatic valves. Warm homes.

From £80 – £500
Learn more

Transparent Pricing

Upfront prices, no nasty surprises

We'll always tell you the cost before we start. These are typical price ranges, your exact quote depends on the job.

ServiceTypical Cost
Emergency callout£85 – £120
Burst pipe repair£100 – £400
Blocked drain clearance£85 – £180
Tap washer replacement£60 – £90
Toilet repair£70 – £140
Leak detection & repair£85 – £300

All prices are estimated. Final costs depend on the specific job. We provide detailed quotes before starting work.

Common Questions

Common Questions About Plumbing in Anlaby

Why is my water pressure so low in my Anlaby semi?
1930s properties in Anlaby often have galvanised steel pipes that corrode inside over 80-90 years. The corrosion narrows the pipe bore and restricts flow. You might also have brown or orange water when you first run the tap. We can replace the rising main with modern copper or plastic (£300-£600) or fit a booster pump if the mains pressure itself is weak.
Do you replace galvanised steel pipes in Anlaby?
Yes, we do full repiping jobs across Anlaby. If your 1930s semi still has galvanised steel, it's probably corroded and causing low pressure or discolored water. We replace the rising main, the bathroom supply, and any other sections that are shot. Takes 1-2 days depending on access.
How much does tap repair cost in Anlaby?
Tap repairs in Anlaby (HU10) cost £60-£120. If it's just a washer or cartridge, it's usually closer to £60-£80. If the tap body is corroded and needs replacing, it's £90-£120. We'll check it when we arrive and quote before starting work.
Can you unblock waste pipes in Anlaby properties?
Yes, we clear blocked sinks, showers, and baths all the time in Anlaby. Kitchen sink blockages are usually fat and grease buildup, bathroom sinks are hair and soap scum. We rodent and use drain unblocker, or dismantle the trap if needed. Usually sorted within an hour for £85-£140.
Do post-war estates in Anlaby have different plumbing issues?
The post-war estates (1950s-60s) typically have copper pipes which are better than galvanised steel, but the original fittings are 60-70 years old. We see corroded compression joints, worn tap washers, leaking toilet cisterns, and occasionally burst pipes when they freeze. Less severe than the 1930s properties but stuff still wears out.
How quickly can you get to Anlaby for a plumbing emergency?
We aim to be with you within 2 hours for emergencies like burst pipes or major leaks if you call during business hours (Mon-Thurs 8.30am-6pm, Fri 9am-4pm). Anlaby's close to Hull so we can usually get there quickly.

Find Us in Anlaby

We cover all of Anlaby (HU10)

Customer Reviews

What Hull homeowners say about us

Real reviews from real customers. We don't cherry-pick, these are typical experiences.

"Pipe burst in the bathroom on a freezing January morning. Called at 9am, engineer was here by 11am. Fixed it in under two hours. No mess, fair price, would use again."

Sarah M

Newland Avenue, HU5

"Toilet completely blocked, wouldn't flush at all. Plumber turned up quickly, cleared it with rods in about half an hour. Explained what caused it and how to avoid it. Top service."

Mike T

Cottingham, HU16

"Kitchen tap had been dripping for weeks. Engineer replaced the cartridge, took about 40 minutes. Bit more expensive than I expected but it's fixed now and the engineer was polite."

Linda K

Spring Bank, HU3

"Outside drain was completely blocked, water backing up into the kitchen. They jetted it clear same day. Found tree roots were the cause. Recommended getting a CCTV survey done which we'll book in."

James R

Hessle, HU13

"Leak under the bathroom sink, didn't know where it was coming from. Engineer found it quickly, tightened a compression joint, checked the rest of the pipework. Job done in an hour."

Emma W

Anlaby, HU10

Get In Touch

Request a free quote

Tell us what you need and we'll get back to you with a no-obligation quote, usually within the hour during working hours.

01482 770 041
Mon–Thurs 8.30am–6pm, Fri 9am–4pm
Covering all Hull postcodes

Quick quote request

Need a plumber in Hull?

Call now for a free, no-obligation quote. Same day service available.

Call us on 01482 770 041